Xcelerator Series Axial Flow Pumps
- Available in single or three phase
- 5HP, 7½HP, 10HP, 15HP & 20HP
- 200, 230, 460, 575 Volt
- All stainless steel construction
- High volume 700-1500 GPM (US. Gal.)
- Low head 2’-25’ total dynamic head
- Axial flow lift provides smooth, low vibration and low pressure operation
- Economical and efficient Franklin Sand Fighter™ water lubricated motor
Technical Specifications
| Voltage 3 Phase, 60 Hz |
Full Load Amps |
Max Load Amps |
Service Factor |
Weight | Height | Min. Submergence | Discharge | |
|---|---|---|---|---|---|---|---|---|
| 1.5 HP | 230 V | 5.0 | 5.9 | 1.3 | 103 lbs | 35" | 31" | 4" NPT |
| 460 V | 2.5 | 3.1 | ||||||
| 575 V | 2.0 | 2.4 | ||||||
| 2 HP | 230 V | 6.7 | 8.1 | 1.25 | 105 lbs | 37" | 33" | |
| 460 V | 3.4 | 4.2 | ||||||
| 575 V | 2.7 | 3.2 | ||||||
| 3 HP | 230 V | 9.5 | 10.9 | 1.15 | 105 lbs | |||
| 460 V | 4.8 | 5.5 | ||||||
| 575 V | 3.8 | 4.4 | ||||||
| 5 HP | 200 V | 17.5 | 20.0 | 190 lbs | 41" | 36" | 6" NPT | |
| 230 V | 15.0 | 17.6 | ||||||
| 460 V | 7.5 | 8.8 | ||||||
| 575 V | 6.0 | 7.1 | ||||||
| 7.5 HP | 200 V | 25.1 | 28.3 | 195 lbs | ||||
| 230 V | 21.8 | 24.6 | ||||||
| 460 V | 10.9 | 12.3 | ||||||
| 575 V | 8.7 | 9.8 | ||||||
| 10 HP | 200 V | 32.7 | 37.0 | 205 lbs | 44" | 38" | ||
| 230 V | 28.4 | 32.2 | ||||||
| 460 V | 14.2 | 16.1 | ||||||
| 575 V | 11.4 | 12.9 | ||||||
| 15 HP | 200 V | 47.8 | 54.4 | 220 lbs | 46" | 40" | ||
| 230 V | 41.6 | 47.4 | ||||||
| 460 V | 20.8 | 23.7 | ||||||
| 575 V | 16.6 | 19.0 |
Control Panel
Standard Features
- Available in 5HP, 7½HP, 10HP, 15HP & 20HP
- Surge suppressor
- 120V/20 amp receptacle
- 120/240V 100 amp distribution panel
- The VFD can be run in full automatic or manual in conjunction with transducer
- 0-100″ Water Column (WC) Transducer works in conjunction with Vacon X5 Series drive to produce efficient and optimized performance
- All Arrow Design Control panels are professionally designed and assembled
- Contact us for more information about our onsite professional installation services
Featuring Franklin Electric Sand Fighter™ Motors
- Double flanged NEMA mounting design
- Steel splined shaft
- StatorShield™, Franklin’s six-feature encapsulation system
- High-capacity, Kingsbury-type, water-lubricated thrust bearing
- Full 3,450 rpm 50/60 Hz design point
- External sand slinger on shaft
- Mechanical face seal at shaft exit
- Copper bar rotor
- All models variable frequency drive (VFD) compatible
- Sand Fighter™ steel models are equippedwith Franklin’s exclusive Sand Fighter™ sealing system for sand or other abrasives
- Overmolded motor leads on all 10 GA leads
Ready to Ship
Our transducer assembly is available in a ready-to-ship version. Simply unpack and add your own pipe.
